2017 Case Steiger 500 Quadtrac. Includes 30" tracks, high flow hydraulic pumps, 1000 RPM PTO, 4 x hydraulic SCV's, hydraulic power beyond, Pro 700 arm rest display with AccuGuide autosteer activation and Trimble 372 receiver. 5117 HOURS SHOWING. **TO BE SOLD UNREGISTERED. **Pre-season servicing has not been completed. **May require service work prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Mildura VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

2017 Deutz Fahr 9340 TTV MFWD tractor. Includes CVT/TTV 60km/h transmission, front and rear 3 point linkage plus weight block for front linkage, rear 540/1000 RPM PTO, 5 x rear hydraulic SCV's, front axle suspension and mechanical cab suspension, BKT IF710/75R42 rear singles and front IF600/70R34 tyres. Recent service at 977 hours on 08/03/2024. **Being sold as is surplus to requirements. Excellent condition. 1026 HOURS SHOWING. **TO BE SOLD UNREGISTERED. **May require service work prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Speed/Tempy (Mallee) VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

2008 John Deere 7930 MFWD tractor with Challenge 4421 2 function front end loader. Includes IVT 42KM transmission, TLS front axle suspension, 4 x rear hydraulic SCV's, ISO coupler, rear 3 point linkage (NO quick hitch frame), rear 540/1000 RPM PTO, drawbar, rear VF480/80R46 singles and front 420/90R30 single tyres. 2300MM GP bucket and 4 tyne square bale forks included for FEL. Very good maintenance history with recent work completed. 10842 HOURS SHOWING. **TO BE SOLD UNREGISTERED. **May require service work/pre-season service prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Lockington VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

GST is NOT applicable on the sale of this item 2019 John Deere 7230R IVT trans 3PL Cab Tractor 6.8lt 230hp, 650/85R38 rear tyres, front axle suspension, Cab Suspension, 4 remotes, NO GPS receiver, steer ready, 4640 screen Very good conditions, for on site inspection please contact Bryan McNeilly 0438 840201

Total Dimensions L- 3.4m W- 1.4m H- 3.8m

Total Dimensions L- 2.3m W- 1m H- 2.5m

Total Dimensions L- 4.1m W- 2m H- 3.8m

2018 Fendt 822 profi plus F/W Front Linkage, Rear Linkage, Front PTO, Rear PTO, Draw Bar, Hydraulic Remotes, Vario Transmission. Trimble Ag-382 receiver Centrepoint subscription Adblue Delete Dpf Delete Egr Delete Engine rebuold completed. Please see service history attached for more details Total Dimensions L- 4.2m W- 2.1m H- 3.6m. ***hydraulic leak from middle rear***

L 4.0m W 2.2m H 2.7m **SOLD WITH LOT 6A (Material 7027199) All Bidding on this lot** **Vin plate not legible details taken from VicRoads*

No manufacturers plate found. Sold with Lot 6 (Material 7024711) All bidding on Lot 6 L 5.1m W 1.9m H 2.0m

Enclosed Air Conditioned Cab ROPS, Passenger Seat, 3 Point Linkage, PTO.

With Slasher,

Total Dimensions L- 3.6m W- 2.2m H- 3.2m

2011 JCB Telehandler. Q-Fit hitch. Pallet forks. 405/70-24 Tyres. Box of replacement tail lights.

John Deere 2017 S690 header with 640D draper front & trailer 3190engine hrs, 2370r hrs est, IF800/70R38 jd chopper & tail board spinners Serail no; 1H00640DTH0795260 John Deere 640d 40ft draper & trailer cross auger, Located in Esperance WA For on Site inspection please contact Bryan McNeilly 0438 840201

2019 Case IH 8240 Axial Flow Combine. Engine Hours: 2243. Rotor Hours: 1514. Fitted With Chopper, Spreaders, Folding auger, Folding Lids, 2 x Sets Concaves, No Auto Steer or GPS Receiver. To Be sold Including 2018 MacDon D145 Rigid Draper Front as pictured. Located Horsham VIC Inspections Via Appointment Only Contact PATRICK FOX 0439 964613

To be sold with Case IH 8240 harvester as pictured. MacDon D145 45 Foot Draper Front. Fitted with Cross Auger. NO Trailer Included. Located Horsham VIC Inspections Via Appointment Only Contact PATRICK FOX 0439 964613

GST is NOT applicable on the sale of this item 2017 Case IH 8240 2WD HEADER, Duals 620/85R42, 3231rotor hrs, 2731 rotor hrs, Engine remapped by EcoTorq Engine Tuning Full set of spiked Rasp bars fitted, have straight sep bars if wanted, just not fitted, Cropscan grain analyser, Stone trap, Reciever included. Macdon D65 40ft, plus trailer, turbo drum fitted, top cross auger All servicing done by Redmac Moora annually, can show previous years pre-season work done on request. Combine has been checked and is harvest ready for this season. Located at Moora WA Please contact Bryan McNeilly 0438 840201

evidence of mice. sold as a set with 7015697

New Holland header front on trailer. Sold as a set with 7009350

2017 Case IH 3050 41ft Vario fornts & trailer In good condition, new end knifes Vario front 41ft/12.5m Retractable fingers Full Length Auger, Automatic Header Height &lateral Tilt Wiring &Sensors on Skid Shoes Single Cut Standard Knife Guards Stainless Steel Floor Located IN Moora For on site inspection please contact Bryan McNeilly 0438 840201

2017 Case IH 3050 41ft Vario fornts & trailer In good condition, new end knifes Vario front 41ft/12.5m Retractable fingers Full Length Auger, Automatic Header Height & lateral Tilt Wiring &Sensors on Skid Shoes Single Cut Standard Knife Guards Stainless Steel Floor Located IN Moora For on site inspection please contact Bryan McNeilly 0438 840201

Chaser bin is being sold due to upgrade to bigger bin and is only being sold as it is surplus to requirements. Very good overall condition. **May require service work/pre-season service prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Crymelon/Warracknabeal VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

2022 Mandako Stubble Cruncher & landroller With 42" drum diameter, 3/4" drum wall thickness, Hydraulic floating hitch hydraulic dual rear wheel steering auto fold 3.4-meter transport width, Water can be added for extra weight, stubble cruncher kit fitted, Located in Moora WA for on site inspection please contact Bryan McNeilly 0438 840201

2016 MacDon R85 16 foot mower conditioner front to suit MacDon M205 windrower. Includes steel conditioner roller package and swath forming chute. **May require service work/pre-season service prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Horsham VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

F/W 40 Foot width, 9 inch spacings, Dual Shoot, Press wheels (some missing). Location Temora NSW. inspections via appointment only. Contact James Daley 0429212229

Kolher petrol motor, Some patches on flighting, 10 inch x 30 foot. Located Temora NSW. Inspections Via Appointment Only. Contact James Daley 0429212229.

2022 Hobbs Engineering Kellerberrin 10mtr Fertilizer Elevator Kohler 14hp petrol motor, very good condition, Located in Moora WA, For on site inspection please contact Bryan McNeilly 0438 840201

Please note damage to outlet, No Loading availably, Custom 34,500lt diesel tank, 11mtr long stand & robin fuel pump included, Located in Moora WA For on site inspection please contact Bryan McNeilly 0438 840201

Mainero 2230 Series 2 grain bag loader being sold with 2 spare unused grain bags. Being sold as is surplus to requirements. Shedded when not in use. **May require service work/pre-season service prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Buangor VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

Located Bowna NSW. Inspection by appointment only. Contact James Daley 0429212229

2020-2021 Seed Terminator seed control unit to suit John Deere S700 Series harvester. Includes monitor/controller, all drive parts required and all deflectors, shields and panels required. Removed from 2018 S790 as new owner of machine has no purpose for an SCU where he is located. **Pre-season servicing has not been completed. **Will require service work prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Echuca VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

2020 Kuhn SB 1290 ID tandem axle 8'x3'x4' standard square baler. Includes TWINPACT double plunger system, Integral Rotor Feed, Gazeeka, Air Tech innoculant applicator, Lincoln auto greaser, 1000 RPM PTO coupler, 620/50R22.5 IMP tyres. Neat condition and done very little work. 3179 Bales Showing. **Pre-season servicing has not been completed. **May require service work prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Shepparton VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

2016 Kuhn LSB 1290 D 8x3x4 tandem axle large square baler. Non-chopper Optifeed rotor feed baler. Includes self greaser. 41312 BALES SHOWING. **Pre-season servicing has not been completed. **Will require service work prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Naracoorte VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

Krone 1290HS 6 String big square baler. Bale Count: 30969 Located Manheim Wagga Wagga NSW 2650. Contact James Daley 0429212229

Single Nozzle bodies, Tandem Axle, Hydraulic Pump, Spring Suspension, Granny Pot. Located Temora NSW. Inspection Via Appointment Only. Contact James Daley 0429212229.

**May require service work/pre-season service prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Sunshine VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

Single Nozzle Boddies (some missing nozzles), 6000L Tank, 36m Boom, Fresh Water Tank, Chemical Induction, Hydraulic Drive Pump, Air Bag Suspension, Adjustable Axle. Located Temora NSW. Inspections Via Appointment Only. Contact James Daley 0429212229.

2016 Amazon's front and rear mount sprayers. sold together.

Roll Over Tarp, Spread to 36m. Monitor Located Temora NSW. Inspections Via Appointment Only. Contact James Daley 0429212229.

Fire fighting tray, Pumps, watertank. Location Temora NSW Inspections Via Appointment Only Contact James Daley 0429212229

2023 Unused Galvanised Dual Axle Cattle Trailer 12 x 6 • • Inside sizes : 3600x1800x1800mm • Over all measurement:5600Lx2160Wx2600H • 1800mm removable cattle crate . • 4 x electric brakes and breakaway controller . • From mudguard to mudguard sizes:2320mm • From hub to hub 800mm • Draw bar length :1800mm • Draw bar size: 100x50x3mm • Total heights from the ground to the top of the mesh cage 2130mm • Bars underneath the trailer size:50x50x2mm • Net weight 1100 KG • 3.5 Tons ATM • 7 pin flat plug • Rims comes with 5 Studs (Ford) Drop down removable rear and front gate free charge • Safety chain • Four Brand new tube less tires & Steel rims Powder coated (185/70R14) • Sold unregistered without plates

starts, hours not visible

Galvanised Spear Fence Panel & Post (Steel) 2023 -Commercial Grade -Black Galvanized Steel Spear Picket Top -Each Panel: L: 2980mm x H: 2000mm Included (welded cap) -Each Post: 60mm x 60mm -10FT X 6.5FT Each Panel -Superior Quality -Brand New -Includes brackets

F/w 9 Tynes. Located Bowna NSW. Inspection by appointment only. Contact James Daley 0429212229

Width 2.3m Height 1.5m Weight 1200 kg

Width 1.8m Height 1.6m Weight 650kg

toro exact model number 44912

broken bonnet, Toro exact model number 30874

vendor advises, requires new reels.

toro exact model number 04040

1 x timber box of various UNUSED oil and fuel filters. **Now not required as for previous model machines no longer owned. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Shaugh (Keith) SA. PLEASE CONTACT PATRICK FOX 0439 964 613

1 x timber box of various UNUSED oil and fuel filters. **Now not required as for previous model machines no longer owned. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Shaugh (Keith) SA. PLEASE CONTACT PATRICK FOX 0439 964 613

- Colour : Black - Double Pier - Galvanized Steel Pipe - Plastic Coated - L5990 x W 550 x H 2588 - Weight 455KG

Perfect companion to container house/home/Granny Flat without bathroom facilities Quality Finish. Fitted with *Shower *Toilet *Sink *Mirror *Lockable door *Hot & Cold water inlets *2 waste outlets *Fork Pockets Shipping container style structure *Light Exhaust fan vent *1 x window Dimensions : 2160mm Wide x 1900mm Long x 2400mm High, *Approximate weight 880 Kgs

*Crane Required at buyers expense for collection* 21m x 40m x 6m New Galvanised Open Front Shed with dividing wall. Holds 1530 big Square hay bales. Hot dipped galvanised frame Web truss and universal beam columns. Australian Engineered for N3 wind rating. Roof purlins and wall purlins for 3 sides. 8 metre bays. All structural, purlin bolts, and tek screws supplied for assembly. All cross bracing, fly bracing, and bridging supplied. Hold down bolts and cage plates for footings. Zinc cladding for roof and 3 sides. Sheds are strapped and pre packed for transportation. All structural components are hot dip galvanised 85um thickness. Plans and 3D pictures are provided for installation. Weight 23.52Tonnes. For a full list of inclusions and plans please see brochure Location Brisbane QLD. Inspections via appointment only. Contact James Daley 0429212229

*Crane required at buyers expense for collection* 15m x 32m x 6m New Galvanised Open Front Shed. Hot dipped galvanised frame Web truss and universal beam columns. Australian Engineered for N3 wind rating. Roof purlins and wall purlins for 3 sides. 8 metre bays. All structural, purlin bolts, and tek screws supplied for assembly. All cross bracing, fly bracing, and bridging supplied. Hold down bolts and cage plates for footings. Zinc cladding for roof and 3 sides. Sheds are strapped and pre packed for transportation. All structural components are hot dip galvanised 85um thickness. Plans and 3D pictures are provided for installation. Weight 13.4 Tonnes. For a full list of inclusions and plans, please see brochure. Location Brisbane QLD. Inspections via appointment only. Contact James Daley 0429212229

*Crane required at buyers expense for collection* 21m x 40m x 6m New Galvanised Open Front Shed. Holds 1530 big Square hay bales. Hot dipped galvanised frame Web truss and universal beam columns. Australian Engineered for N3 wind rating. Roof purlins and wall purlins for 3 sides. 8 metre bays. All structural, purlin bolts, and tek screws supplied for assembly. All cross bracing, fly bracing, and bridging supplied. Hold down bolts and cage plates for footings. Zinc cladding for roof and 3 sides. Sheds are strapped and pre packed for transportation. All structural components are hot dip galvanised 85um thickness. Plans and 3D pictures are provided for installation. Weight 21.7 Tonnes. For a full list of inclusions and plans, please see brochure Location Brisbane QLD. Inspections via appointment only. Contact James Daley 0429212229

2.75m Wide roller with curved edges ,hydraulic transport wheels, Cleaning scraper, WATER CAPACITY up to 3000 L. 2500KG empty weight 3m overall width approx. CONTACT BRYAN MCNEILLY 0438 840201

BH95 Backhoe for compact tractors Self contained with PTO pump suit tractor Horsepower 25-30HP Bucket x 2 one apx 250 with teeth other 600mm wide bucket Digging depth 950mm Reach 2,100mm Load height 1,250mm Undercut 400mm Boom swing 180 degree Hitch pins CAT 1 PTO rpm 540 Weight 330kg

For 15-40HP Tractors, 3-Point Linkage, 180 Degree Lateral Swivel, Powered Hydraulic System. BH95 Backhoe for compact tractors Self contained with PTO pump suit tractor Horsepower Bucket x 2 one apx 250 with teeth other 600mm wide bucket Digging depth 950mm Reach 2,100mm Load height 1,250mm Undercut 400mm Boom swing 180 degree Hitch pins CAT 1 PTO rpm 540 Weight 330kg CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland, CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland, CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland, CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland, CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland, CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland, CONTACT BRYAN MCNEILLY 0438 840201

K Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland, CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland CONTACT BRYAN MCNEILLY 0438 840201

FK Bale Grab Euro hitch Heavy duty European-made bale grab- Euro hitch Brackets fitted Specifications Depth 1165mm Length 1360mm Height 740mm Opening width 2150mm Weight 195kg Lifting capacity 1200kg Bale size 900 mm-1800mm Pipe Arm Size 60mm x 3mm Made in Poland CONTACT BRYAN MCNEILLY 0438 840201

ntertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm  Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

Intertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm  Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

Intertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm  Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

Intertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm  Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

ntertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm  Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

Intertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm  Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

Intertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm  Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

ntertech Bale Grab Euro Hitch Heavy Duty Depth 1100mm Length 1400mm Height 820mm from bottom to top of the arm & nbsp; Opening width 2450mm Weight 256kg Lifting capacity 1200kg Bale size   1200 mm-1800mm Pipe Arm Size 60mm x 3mm, Bryan McNeilly 0438 840201

1.6m Length

1.6m Length

1.6m Length

1.6m Length

1.6m Length